Copper Verdigris 77" X 44" Oval Table With Weldon Base
Extra 10% Applied in Cart
Thousands of monarch butterflies make their way to an enchanting Mexican village once a year, where metalworking is a prized skill passed down from generation to generation. From this destination comes one of our signature collections. Tonal variations characterize these dramatic tables, bringing new life to recycled copper and zinc alloy. Hammered more than 3,500 times by hand to create a one-of-a-kind work of art. Upon completion, a Monarch butterfly is hand-stamped onto the edge to signify its transformation.
Copper Verdigris table tops are handcrafted of 100 percent recycled copper.
Handcrafted in Mexico using centuries-old techniques, recycled materials are melted at extreme temperatures and then formed to engineered hardwood to create the tabletop.
Artisans hand-hammer table tops more than 3,500 times, then hold it over an open fire to bring out the varied patina.
After copper is adhered to the tabletop, artisans apply the verdigris solution to the top and heat it over an open flame. Once the solution dries, artisans use water and sandpaper to create the worn look.
Two layers of lacquer add protection and a subtle sheen.
Upon completion, each artisan hand-stamps a Monarch butterfly onto the edge of the table.
Select from our gorgeous iron dining bases: Arabesque, Arvada, Chantel, Edison, Italian, Kenya, Montecito, Moravian and Weldon. Or, select our wooden Trieste dining base. Contact an Arhaus Associate for more options and details.
77" x 44" oval seats up to 8.
90" x 52" oval seats up to 10.
Spills should be removed immediately with a damp cloth.
Hand-wash with mild soap and water. Use a soft sponge. Do not use abrasives as they may scratch the surface of this collection. Dry immediately with a soft cloth.
For daily cleaning, use mild soap and water on all surfaces and dry with a soft cloth.
Occasionally, use Arhaus Furniture Copper Wax as follows: wash and dry surface thoroughly. Apply four dime-sized drops of product to a clean, soft cotton cloth to cover each 2 ft. area. Apply evenly with a straight back and forth motion. After haze appears, allow to dry for 15 minutes or up to 24 hours. Remove the haze by buffing with a clean, soft cotton towel or t-shirt.
At initial application, two coats are recommended (and allow at least 24 hours between coats for curing).
Iron bases: We recommend cleaning with a damp cloth. You may use a mild soap if necessary. Towel dry.
Use coasters, trivets and felt pads under objects to preserve the finish of this piece.
Never place hot dishes on this tabletop; we recommend the use of felt-backed tablemats.
Always avoid exposure to direct sunlight or heat (e.g. by placing it in front of a radiator) as this can cause cracking and potential fading of the wood; a minimum 30 cm clearance from heat sources is advised.
Do not drag piece(s) across the floor as this will cause damage or weaken joints.Dropping furniture onto corners or feet will cause damage.
Toys, buckles and heels will scratch furnishings—try to prevent these objects from coming into contact with your piece(s).
Limited Lifetime Warranty
We are committed to telling your home design story. This means bringing you designs handcrafted by the world's most skilled artisans, using the highest quality materials and paying attention to every detail in the construction process. To ensure this quality, we warrant our merchandise to be free of defects in both material and workmanship. Please see our Limited Lifetime Warranty for details.
We maintain a 14-day return policy. Should you discover a manufacturer defect or damage upon delivery, please notify our Concierge Team immediately 1.866.427.4287. To process a return or exchange, we require the original receipt. A 10% restocking fee and redelivery fee will be applied to merchandise returned or exchanged for reasons other than manufacturer’s defect or damage. Please note: Special Order merchandise cannot be returned, cancelled or exchanged for any reason other than manufacturer defect or damage. A 50% deposit is required at the time of purchase. Please Note: Discontinued and Clearance items cannot be returned or exchanged. Before finalizing your purchase, please verify clearance measurements of doors, stairways, elevators and hallways. Delivery and shipping fees are not refundable should your ordered items not fit through these areas. For more information, please see our Terms & Conditions.