Arhaus furnishings are designed to withstand everyday use; however normal wear and tear is reflective of your care and use.
Our artisan-crafted leathers can be easily maintained by spot-cleaning using a dry cloth to remove dust and dirt.
For long-term care, use an undyed cloth dampened with distilled water to wipe down your leather. This will help keep your upholstery looking its best by adding moisture back into the leather.
Leathers can be cleaned more thoroughly using wax-free leather cleaner and conditioner. For best results, follow use instructions for all cleaning products carefully. Do not over apply.
Clean oil-based spills from leather by blotting with a clean, undyed, soft cloth. Oil should dissipate over time.
Spot-clean other liquid spills by blotting with clear, mild soap and distilled water. Follow by wiping the area with distilled water. Use a clean, undyed, soft, and absorbent cloth. Avoid scrubbing. Allow to air-dry.
Avoid using harsh cleaners or solvents, as these could leave marks or otherwise cause damage.
Do not clean using abrasives, harsh, corrosive chemicals, or care products containing ammonia or silicone.
Pieces upholstered in Burbank Natural Performance Fabric can be spot-cleaned using water-free cleaning solvents only. Do not use water or dry clean.
To help prevent fabrics and leathers from fading over time, avoid placing indoor upholstery in direct sunlight or near sources of heat or moisture.
Vacuum your upholstery occasionally, using upholstery and crevice attachments to clean up loose particles.
Spot-clean upholstery using a clean, absorbent, undyed cloth with a blotting motion. Blot from the outside towards the middle of the soiled area to prevent rings. Never scrub.
Before cleaning, pre-test upholstery cleaners for color loss and compatibility by applying a small amount to a hidden section of fabric.
If you are mixing cleaners, dilute the mixture using distilled water. Be careful not to over-wet your furniture.
Avoid over-rubbing and never clean fabrics with a hard-bristle brush as this could damage fibers.
All fabrics may pill from friction and normal wear, as everyday use loosens fibers. Occasionally use a fabric (or “sweater”) shaver to gently remove pills. Pilling should decrease once loose fibers are removed.
For overall cleaning or to clean any overly soiled upholstery, we recommend contacting a professional cleaning service.
Metal surfaces should be dusted regularly with a soft, dry cloth to remove any particles or loose dirt.
Avoid contact with excessive moisture.
Wipe-up spills immediately with a soft, dry cloth; remove dirt with a damp cloth. Dry immediately.
Do not clean using care products containing ammonia or silicone, as these could damage metal finishes.
Avoid using abrasives or harsh, corrosive chemicals as these could scratch or mark surfaces.

Customer Looks We Love